Location Fault Indicator

Cảnh báo sự cố tại chỗ (đèn báo)

The on-site trouble-shooting device helps the operator quickly locate the problem for repairs
      Fault indicator is installed on the 6-38.5kV transmission line which is responsible for detecting faults on the transmission line. In the event of a malfunction, the operator can easily identify the problem area, fault branch and fault point quickly through the daytime red flag alert and display. LEDs at night appear on the alert.
    
The on-site trouble-shooting device helps the operator quickly locate the problem for repairs
      Fault indicator is installed on the 6-38.5kV transmission line which is responsible for detecting faults on the transmission line. In the event of a malfunction, the operator can easily identify the problem area, fault branch and fault point quickly through the daytime red flag alert and display. LEDs at night appear on the alert.
     Basic features of crash warning:
          - Quickly spot problem location to fix.
          - Displays alerts and disables quick alerts when a short circuit or ground fault is detected. Disable automatic warnings at pre-set time, by hand or by electric current
          - Structured with UV and stainless steel plastic housing, this device can operate in extreme weather conditions, low power consumption with intelligent battery control to ensure interoperable operation. Long and lasting with an average lifespan of up to 15 years.
          - Automatically receive load currents and adjust the load line by load current.
          - Ability to alert for permanent issues, transient issues and low battery.
          - Ability to send incident information, line parameters (peak voltage, average voltage, etc), battery status, etc. via GSM, GPRS to phone or connected to the system. SCADA.
          - Easy to use: Easy to remove with a dedicated tool without cutting off electricity.
This equipment has contributed greatly to completely changing the classic fault definition based on judgment and switching devices in turn to find fault. Therefore, the device also contributes to reducing incident time as well as energy saving, thus contributing to improving the reliability of power supply.
     Classify
     Currently there are many ways to categorize by purpose or feature, specifically:
          - Location of use: Emergency overhead line fault warning and fault warning for underground cable.
          - According to the function: Normal type does not send a remote signal and the type sends a remote signal.
 

Products in this category