Aluminum bus bar

Ống nhôm thanh cái

Aluminum bus bar
Our company provides all kinds of aluminum busbar for 110kV, 35kV and 22kV substations with the following sizes:
No Sign External diameter
(mm)
In diameter (mm) Weigh (kg/m) Rated current (A)
1 70/64 70 64 2.32 1700
2 80/72 80 72 2.62 2289
2 80/70 80 70 3.17 2500
3 90/80 90 80 3.66 2810
4 100/90 100 90 4.10 3063
5 110/100 110 200 4.53 3107
6 120/110 120 110 4.96 3368
7 130/116 130 116 7.43 4251
8 150/136 150 136 8.64 4796
9 170/156 170 156 9.88 5116
10 200/180 200 180 16.40 8131
11 250/230 250 230 20.74 9047
12 300/276 300 276 29.62 9963
 
 - Standard aluminum tubes: IEC or GB / T6893, GB / T3190 ..
- Type of alloy: 1060-H18, 6063-T6, T10 and 6063RE - T6, T10. Depending on the requirements of hardness, maximum current, thermal capacity, choose the appropriate alloys.
- Voltage: 22kV, 35kV, 110kV, 220kV and 500kV
- New goods status 100%
- Available at the company store, address: Tan Xuan Street, Dong Ngac Ward, North Tu Liem, Hanoi (Thang Long Bridge)
 
Currently replacing wires in transformer stations with aluminum rods is widely used, however, the selection of busbars for 22kV, 35kV, 110kV or 220kV substations will differ on the basis of technical characteristics such as degree Hard, conductive, heat resistant ... Therefore, please contact us for the most suitable aluminum pipe.
Description: Ống nhôm thanh cái
Aluminum bus bar on 110kV substation

Products in this category